Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

3045 Deakin St
Berkeley, CA, 94705
United States

A rich selection of exclusive HiFi devices and gears handcrafted in Italy

Gold Note - B-7 Ceramic - Tonearm

Turntables & Cartridges

Gold Note - B-7 Ceramic - Tonearm


Gold Note - B-7 Ceramic - Tonearm


The B-7 Ceramic ball bearing tonearm is a top class exclusive model that features a Titanium arm wand made in six different thickness sections for the best damping vibration feedback effect thanks to the material and the geometry.

Add To Cart

The rear arm wand is dampened with a silicon spacer to reduce unwanted vibration. The rear arm wand is equipped with a finely machined Stainless Steel counterweight.
The B-7 Ceramic features four high precision, custom made for Gold Note by GRW-Germany, micro ceramic ball bearings designed to enable an extraordinary low noise quality and thus allowing the smoothest fine musical details.
The vertical ball bearings are pivoted through custom stainless steel, manually adjustable, threaded bolts, while the horizontal movement is driven by two micro ball bearings directly inserted in the main rectified pivot of the arm. The arm is secured to the turntable plinth by the arm shaft that has a diameter of 23 mm/0.90 inches.
The B-7 Ceramic azimuth is adjustable through a pair of 2 mm micro bolts that guarantee perfect alignment.

The B-7 tonearm exclusively features a double counterweight to set up most of the market phono cartridge up to 15 gram mass. Optionally, other extra weights are available to handle phono cartridges with higher mass.

The B-7 Ceramic effective length of 223 mm/8.77 inches and the 12 mm overhang allow easy installation of the arm  in any turntable available on the market.


Shell and pivot: black anodized aluminium
Arm wand: titanium grey
Counterweight: chrome
Hydraulic lift board: chrome


Typology9” Ball Bearing Tonearm
Effective length223 mm (8.779 in)
Overhang12 mm (0.472 in)
Arm wandTitanium with 6 different section of thickness
Shaft23 mm (0.905 in)
Dynamic effective mass10 g
VTF0.186 N (19 g)
VTAAdjustable on collar
LiftHydraulic and adjustable
Anti skatingWire
AzimuthAdjustable through 2 mm hex-bolt on headshell
Internal cablesAWG36 Hyper Litz shielded 99.9999% OFC
External cables1 m (39.37 in) custom 5 pole DIN/RCA
Total length325 mm (12.795 in)
Total weight380 g (0.837 lbs)

Recommended Cartridges

Similar product