Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

3045 Deakin St
Berkeley, CA, 94705
United States

A rich selection of exclusive HiFi devices and gears handcrafted in Italy

Gold Note - XT-7 - Stand Loudspeaker

Speakers

Gold Note - XT-7 - Stand Loudspeaker

XT-7-macro-1.jpg
XT-7-macro-2.jpg
XT-7-macro-3.jpg
XT-7-macro-4.jpg
XT-7-macro-5.jpg
XT-7-macro-6.jpg
XT-7-macro-7.jpg
XT-7-macro-8.jpg
XT-7-macro-9.jpg
XT-7+loudspeaker.png
XT-7-macro-1.jpg
XT-7-macro-2.jpg
XT-7-macro-3.jpg
XT-7-macro-4.jpg
XT-7-macro-5.jpg
XT-7-macro-6.jpg
XT-7-macro-7.jpg
XT-7-macro-8.jpg
XT-7-macro-9.jpg
XT-7+loudspeaker.png

Gold Note - XT-7 - Stand Loudspeaker

16,090.00

The unique XT curved design is based on a reinforced chassis in wooden multilayer panels to control resonances and sound, a design where every single element is crucial and serve the sole purpose of achieving the best sound possible.

The cabinets are conveniently separated for bass and mid/highs to enhance perfect tuning: the bass drivers cabinet side is vented while the mid/highs is perfectly sealed to reduce internal reflections. The massive swallow tailed stand features adjustable spikes and guarantees perfect stability while completing the structure to enhance performances, the hidden spikes can be adjusted to find always the right balance.

XT-7 offers state-of-the-art solutions for a sound without compromises: high quality crossover exclusively made with Mundorf and Clarity components and ultra-stiff woven polypropylene SEAS and AMT Ribbon drivers made in Germany.

Finish:
Quantity:
Add To Cart

TWEETER

The first Gold Note loudspeaker to feature a ribbon tweeter, this AMT ultra-linear unit is enhanced with a metal dampened rear chamber. With a new custom cooling coil radiator and dampening aluminium blocking bar designed for resonance reduction and to increase extension linearity.

MIDRANGES

A 160mm ultra-linear recessed driver developed with SEAS and enhanced with a proprietary metal chassis.

The unique curved cone in ultra-hardened woven polypropylene allows an excellent internal damping factor while the moving parts are perfectly matched together for a smooth and extended frequency response.

A special radial reinforced low loss rubber surround reduces radial resonances and prevents surround break up at large excursions.

The custom aluminium phaser reduces compression due to temperature variations in the voice coil, avoiding the resonance that would occur between the dust cap and the pole piece while also increasing the long-term power handling capacity. The internal ring around the coil drastically reduces distortion and inter-modulation.

The basket, obtained by MIM (metal injection molding) to achieve extreme stiffness and stability, keeps all the components in perfect alignment. 

Large windows above and below the basket's spider are designed to reduce sound reflection, air flow noise and cavity resonance to the minimum; the custom spider enhances driver's excursion and give better details and greater linearity.

WOOFERS

Using the same principles applied to Midranges, we developed with SEAS two 180mm ultra-linear recessed drivers.

The driver is powered by our unique curved cone in ultra-hardened woven polypropylene to achieve great internal damping and perfect control over the moving parts, that are always perfectly matched to deliver a fantastic frequency response.

To allow extreme coil excursion with low distortion, the magnet system features a bumped back plate with long and light weight copper clad aluminium voice coils.

The heavy copper ring below the T-shaped pole piece reduces non-linear and modulation distortion.

Bullet shaped phase plugs reduce compression due to temperature variations in the voice coils, preventing any resonance problem that could  occur and also increasing the long-term power handling capacity.


The basket obtained with MIM and the basket's spider design are developed to preserve structural alignment for maximum stiffness and also to reduce unwanted noises from air flows, resonance and sound reflection.

CROSSOVER

For XT-7 we developed a deluxe crossover with state-of-the-art components provided by Mundorf and Clarity: the passive Crossover Low-High Dual-Slope cuts at 280Hz & 3000Hz and features a resistive design to enable ultra-linear load that support the work of the amplifiers minimising the stress on power supplies even at a nominal impedance of 4Ω.

The boards are made of thick audio-grade and anti-resonance glass fibre with 70uM gold plated conductors and power a sophisticated triple crossover network and a summing midrange multi-slope design perfectly integrate the drivers of the array for a fulfilling close field audio experience. This high quality crossover is completed with Mundorf handmade air winding coils and Clarity & Mundorf caps.

REVIEW | 6MOONS

Demonstrably excellent off-axis behaviour meant socially commodious sweetspotting, not a laser-guided tour for just one. Checking from my work desk against the right sidewall became that tell. Where many AMT tweeters married to standard drivers stand out as being dynamically friskier, hence faster and forward, Garlo Certini's use of Mundorf's pleated driver fell perfectly in line with his strategically chosen mates. It wasn't turned up, brisk or overactive by any stretch. The big-bore air exchanger also known as rear port gave the paralleled woofers unexpected dynamic headroom. Properly controlled by a high-current low-impedance amp, this dynamic duo could really dish out kick drums, toms, Latin-style left-handed piano salvos and assorted bass makers [...] the midrange proved capable of good vocal directness whereby singers seem to virtually peel out of thin air.
— Srajan Ebaen

Read the full review.